| View previous topic :: View next topic |
| Author |
Message |
Just a citizen . . .
Guest
|
 Posted: Sat Nov 15, 2008 8:53 pm Post subject: Micro BTX MB in non-Micro BTX case |
 |
|
I have a D945GCZ Intel MB - it's in a micro-BTX case. It's a normal home
machine - no separate graphic card, a single hard drive, nothing fancy, no
gaming requirements, or anything like that. I'm looking for a different
case to reduce the excessive fan noise. I have replaced the CPU's thermal
module with a replacement from Thermaltake and it's near silent - all of the
noise seems to be coming from the power supply fan. To test, I briefly
stopped the PS fan and the machine was silent. I have replaced the PS once
already, with a model that was supposed to be quiet, and it wasn't - there
was virtually no difference. Additionally, I was never happy with the
overall cooling of the machine - so I'm trying to find a different case
that''ll work with this board, but I'm not having any luck - the micro-BTC
seems to be rare.
Any suggestions on an alternative case that'll work, AND run very quietly?
THANKS! |
|
| |
|
 Back to top |
The Seabat
Guest
|
| Posted: Sat Nov 15, 2008 9:25 pm Post subject: Re: Micro BTX MB in non-Micro BTX case |
|
|
On Sat, 15 Nov 2008 08:53:12 -0600, "Just a citizen . . ."
<citizens_rights@junkmail.com> wrote:
| Quote: | I have a D945GCZ Intel MB - it's in a micro-BTX case. It's a normal home
machine - no separate graphic card, a single hard drive, nothing fancy, no
gaming requirements, or anything like that. I'm looking for a different
case to reduce the excessive fan noise. I have replaced the CPU's thermal
module with a replacement from Thermaltake and it's near silent - all of the
noise seems to be coming from the power supply fan. To test, I briefly
stopped the PS fan and the machine was silent. I have replaced the PS once
already, with a model that was supposed to be quiet, and it wasn't - there
was virtually no difference. Additionally, I was never happy with the
overall cooling of the machine - so I'm trying to find a different case
that''ll work with this board, but I'm not having any luck - the micro-BTC
seems to be rare.
Any suggestions on an alternative case that'll work, AND run very quietly?
THANKS!
|
Howdy: I'm no expert by any definition, but I run my Asus A8N-E board
in a BTX case. From what I can tell, if the MB holes line up, it
doesn't matter which board/case you use. The only difference I can
tell is that your I/O layout on the back will be reversed (top to
bottom) and the power supply will be on the bottom instead of the top.
Which makes for a better center of gravity. Also, you have to get used
to the removeable case cover being on the opposite side.
The only thing that I had a problem with was cable lengths. The ports
on the MB will be at opposite ends and your cables might not reach.
--
The seabat
Filtering GoogleGroups & Goobers with extreme prejudice!
Usenet Improvement Project: http://improve-usenet.org/ |
|
| |
|
| Back to top |
philo
Guest
|
| Posted: Mon Nov 17, 2008 12:58 am Post subject: Re: Micro BTX MB in non-Micro BTX case |
|
|
"The Seabat" <seabat@NOSPAMboardermail.com> wrote in message
news:oupth4h8674ntn88jvccu3p9kut2js3ppu@4ax.com...
| Quote: | On Sat, 15 Nov 2008 08:53:12 -0600, "Just a citizen . . ."
citizens_rights@junkmail.com> wrote:
I have a D945GCZ Intel MB - it's in a micro-BTX case. It's a normal
home
machine - no separate graphic card, a single hard drive, nothing fancy,
no
gaming requirements, or anything like that. I'm looking for a different
case to reduce the excessive fan noise. I have replaced the CPU's
thermal
module with a replacement from Thermaltake and it's near silent - all of
the
noise seems to be coming from the power supply fan. To test, I briefly
stopped the PS fan and the machine was silent. I have replaced the PS
once
already, with a model that was supposed to be quiet, and it wasn't -
there
was virtually no difference. Additionally, I was never happy with the
overall cooling of the machine - so I'm trying to find a different case
that''ll work with this board, but I'm not having any luck - the
micro-BTC
seems to be rare.
Any suggestions on an alternative case that'll work, AND run very
quietly?
THANKS!
Howdy: I'm no expert by any definition, but I run my Asus A8N-E board
in a BTX case. From what I can tell, if the MB holes line up, it
doesn't matter which board/case you use. The only difference I can
tell is that your I/O layout on the back will be reversed (top to
bottom) and the power supply will be on the bottom instead of the top.
Which makes for a better center of gravity. Also, you have to get used
to the removeable case cover being on the opposite side.
The only thing that I had a problem with was cable lengths. The ports
on the MB will be at opposite ends and your cables might not reach.
|
NO
You cannot use an ATX formfactor motherboard in a BTX style case...
they are not interchangeable
anyway it's a moot point
because changing the case is not going to make the machine any less
noisy...
however if you want a new case..it's as simple as putting BTX case
into a google search |
|
| |
|
| Back to top |
Just a citizen . . .
Guest
|
| Posted: Thu Nov 20, 2008 1:15 am Post subject: Re: Micro BTX MB in non-Micro BTX case |
|
|
The problem is with the micro BTX case power supply - I KNOW that's where
the noise is coming from - it's a CFX form factor (kinda L-shaped), there
are VERY few of them available - I've already replaced it once and it's
still noisy.
Some of the Thermaltake cases that have a BTX "adapter" would be OK, but by
the time ya get the case and the adapter and a quiet PS, it's pushing $250.
I am seeing some other hybrid ATX cases - less expensive - that advertise to
handle a BTX board - that's probably gonna be the fix for me - with
something other than a specific micro-BTX case, I'll have other PS options -
including some of the ultra quiet PS units that are out there.
Worst thing I ever did getting that micro-BTX board and case . . .
"philo" <philo@privacy.net> wrote in message
news:O6ednYjOmrJc8b3UnZ2dnUVZ_hCdnZ2d@ntd.net...
| Quote: |
"The Seabat" <seabat@NOSPAMboardermail.com> wrote in message
news:oupth4h8674ntn88jvccu3p9kut2js3ppu@4ax.com...
On Sat, 15 Nov 2008 08:53:12 -0600, "Just a citizen . . ."
citizens_rights@junkmail.com> wrote:
I have a D945GCZ Intel MB - it's in a micro-BTX case. It's a normal
home
machine - no separate graphic card, a single hard drive, nothing fancy,
no
gaming requirements, or anything like that. I'm looking for a
different
case to reduce the excessive fan noise. I have replaced the CPU's
thermal
module with a replacement from Thermaltake and it's near silent - all
of
the
noise seems to be coming from the power supply fan. To test, I briefly
stopped the PS fan and the machine was silent. I have replaced the PS
once
already, with a model that was supposed to be quiet, and it wasn't -
there
was virtually no difference. Additionally, I was never happy with the
overall cooling of the machine - so I'm trying to find a different case
that''ll work with this board, but I'm not having any luck - the
micro-BTC
seems to be rare.
Any suggestions on an alternative case that'll work, AND run very
quietly?
THANKS!
Howdy: I'm no expert by any definition, but I run my Asus A8N-E board
in a BTX case. From what I can tell, if the MB holes line up, it
doesn't matter which board/case you use. The only difference I can
tell is that your I/O layout on the back will be reversed (top to
bottom) and the power supply will be on the bottom instead of the top.
Which makes for a better center of gravity. Also, you have to get used
to the removeable case cover being on the opposite side.
The only thing that I had a problem with was cable lengths. The ports
on the MB will be at opposite ends and your cables might not reach.
NO
You cannot use an ATX formfactor motherboard in a BTX style case...
they are not interchangeable
anyway it's a moot point
because changing the case is not going to make the machine any less
noisy...
however if you want a new case..it's as simple as putting BTX case
into a google search
|
|
|
| |
|
| Back to top |
Bill
Guest
|
| Posted: Thu Nov 20, 2008 6:19 am Post subject: Re: Micro BTX MB in non-Micro BTX case |
|
|
In article <gg1ol4$8h4$1@news.motzarella.org>,
citizens_rights@junkmail.com says...
| Quote: | The problem is with the micro BTX case power supply - I KNOW that's where
the noise is coming from - it's a CFX form factor (kinda L-shaped), there
are VERY few of them available - I've already replaced it once and it's
still noisy.
Some of the Thermaltake cases that have a BTX "adapter" would be OK, but by
the time ya get the case and the adapter and a quiet PS, it's pushing $250.
I am seeing some other hybrid ATX cases - less expensive - that advertise to
handle a BTX board - that's probably gonna be the fix for me - with
something other than a specific micro-BTX case, I'll have other PS options -
including some of the ultra quiet PS units that are out there.
Worst thing I ever did getting that micro-BTX board and case . . .
snip |
Why not just replace the fan in the power supply?
Bill
--
GMail, Google Goobers and Web to Usenet gateway users.
This century's answers to AOL and WebTV. |
|
| |
|
| Back to top |
Just a citizen . . .
Guest
|
| Posted: Thu Nov 20, 2008 6:56 pm Post subject: Re: Micro BTX MB in non-Micro BTX case |
|
|
Tried that - it was a bit quieter until it popped and died - I think an
unmodified PS will be safer - I'm a SW guy, always have parts left over when
I fix something.
I'm finding a few cases that might work - without the 10 drive bays that the
ones from Thermaltake have - typically with an adapter to handle the
microBTX form factor - I should be able to easily get a quiet PS for a
standard (ATX) case - other fish to fry right now - back later.
"Bill" <spamtrap@tinlc.lumbercartel.com> wrote in message
news:MPG.238e4d07ea7d9d24989aa8@localhost...
| Quote: | In article <gg1ol4$8h4$1@news.motzarella.org>,
citizens_rights@junkmail.com says...
The problem is with the micro BTX case power supply - I KNOW that's where
the noise is coming from - it's a CFX form factor (kinda L-shaped), there
are VERY few of them available - I've already replaced it once and it's
still noisy.
Some of the Thermaltake cases that have a BTX "adapter" would be OK, but
by
the time ya get the case and the adapter and a quiet PS, it's pushing
$250.
I am seeing some other hybrid ATX cases - less expensive - that advertise
to
handle a BTX board - that's probably gonna be the fix for me - with
something other than a specific micro-BTX case, I'll have other PS
options -
including some of the ultra quiet PS units that are out there.
Worst thing I ever did getting that micro-BTX board and case . . .
snip
Why not just replace the fan in the power supply?
Bill
--
GMail, Google Goobers and Web to Usenet gateway users.
This century's answers to AOL and WebTV. |
|
|
| |
|
| Back to top |
|
